1st_pimeta-01.jpg
Viewed: 335 times.
|
The plan is to build a color organ, and put a clear lexan spacer in, in place of the brass stand-offs, having the LEDs of the color organ light up the lexan spacer.
Viewed: 340 times.
|
the three wholes in the upper left corner will become RGB sensitivity controls for the color organ. Currently, the lower right most hole holds a 3mm blue LED to indicate when the amp is on.
Viewed: 304 times.
|
1st_pimeta-04.jpg
Viewed: 292 times.
|
1st_pimeta-05.jpg
Viewed: 301 times.
|
1st_pimeta-06.jpg
Viewed: 298 times.
|
1st_pimeta-07.jpg
Viewed: 298 times.
|
The green LED is the old power indicator for the HDD, it now indicates that wall power has been connected to the amp. It's just below and left of the out jack, the flash drounds it out a bit (a lot).
Viewed: 338 times.
|
1st_pimeta-09.jpg
Viewed: 319 times.
|
1st_pimeta-10.jpg
Viewed: 288 times.
|
1st_pimeta-11.jpg
Viewed: 285 times.
|
1st_pimeta-12.jpg
Viewed: 284 times.
|
1st_pimeta-13.jpg
Viewed: 294 times.
|
1st_pimeta-14.jpg
Viewed: 299 times.
|
1st_pimeta-15.jpg
Viewed: 293 times.
|
1st_pimeta-16.jpg
Viewed: 294 times.
|
The USB DAC.
Viewed: 297 times.
|
1st_pimeta-18.jpg
Viewed: 321 times.
|
